Host–Guest Chemistry between Perylene Diimide (PDI) Derivatives and 18‐Crown‐6: Enhancement in Luminescence Quantum Yield and Electrical Conductivity

Perylene diimide (PDI) derivatives exhibit a high propensity for aggregation, which causes the aggregation‐induced quenching of emission from the system. Host–guest chemistry is one of the best‐known methods for preventing aggregation through the encapsulation of guest molecules. Herein we report the use of 18‐crown‐6 (18‐C‐6) as a host system to disaggregate suitably substituted PDI derivatives in methanol. 18‐C‐6 formed complexes with amino‐substituted PDIs in methanol, which led to disaggregation and enhanced emission from the systems. Furthermore, the embedding of the PDI ? 18‐C‐6 complexes in poly(vinyl alcohol) (PVA) films generated remarkably high emission quantum yields (60–70 %) from the PDI derivatives. More importantly, the host–guest systems were tested for their ability to conduct electricity in PVA films. The electrical conductivities of the self‐assembled systems in PVA were measured by electrochemical impedance spectroscopy (EIS) and the highest conductivity observed was 2.42×10^?5 S cm^?1.     

Effect of rotation on the onset of double diffusive convection in a Darcy porous medium saturated with a couple stress fluid

The effect of rotation on the onset of double diffusive convection in a horizontal couple stress fluid-saturated porous layer, which is heated and salted from below, is studied analytically using both linear and weak nonlinear stability analyses. The extended Darcy model, which includes the time derivative and Coriolis terms, has been employed in the momentum equation. The onset criterion for stationary, oscillatory and finite amplitude convection is derived analytically. The effect of Taylor number, couple stress parameter, solute Rayleigh number, Lewis number, Darcy–Prandtl number, and normalized porosity on the stationary, oscillatory, and finite amplitude convection is shown graphically. It is found that the rotation, couple stress parameter and solute Rayleigh number have stabilizing effect on the stationary, oscillatory, and finite amplitude convection. The Lewis number has a stabilizing effect in the case of stationary and finite amplitude modes, with a destabilizing effect in the case of oscillatory convection. The Darcy–Prandtl number and normalized porosity advances the onset of oscillatory convection. A weak nonlinear theory based on the truncated representation of Fourier series method is used to find the finite amplitude Rayleigh number and heat and mass transfer. The transient behavior of the Nusselt number and Sherwood number is investigated by solving the finite amplitude equations using Runge–Kutta method.     

Phase behaviour of thermotropic banana-shaped compounds under pressure

The phase behaviour of two achiral bent core banana-shaped compounds, the hexyloxy (compound I) and decyloxy (compound II) members of the 1,3-phenylene bis[N-(2-hydroxy-4-n-alkoxybenzylidene)-4′-aminobenzoate] series was investigated under hydrostatic pressures up to 300?MPa using high pressure differential thermal analysis and light transmission methods. The reversible transition sequence crystal (Cr₁)–B₁ phase–isotropic liquid (I), observed at room pressure for compound I, remains in the pressure region up to c 70?MPa. At higher pressures a pressure-induced crystalline phase (Cr_i) appears between the Cr₁ and B₁ phases, its temperature region becoming wider with increasing pressure. The temperature vs. pressure phase diagram shows a triple point of 72.9?MPa and 160.3°C for the Cr₁, Cr_i and B₁ phases, indicating the lower limit of pressure for the Cr_i phase. In compound II the reversible transition sequence crystal (Cr₁)–B₂ phase–I is seen over the whole pressure region, and the temperature range of the B₂ phase remains unaltered. It is concluded that both the B₁ and B₂ banana phases are stable over the whole pressure region studied.     

A Practical Synthesis of SDZ WAG 994 by Selective Methylation of N6-Cyclohexyladenosine

A selective 2′-O-methylation of N⁶-cyclohexyladenosine (2) under phase-transfer catalysis conditions and a preferential crystallization of N⁶-cyclohexyl-2′-O-methyladenosine (1, SDZ WAG 994) from a mixture of by-products is described. A plausible explanation for the selective crystallization of 1 as a hydrate is presented.     

Evidence of continuous evolution of smectic A2 from smectic Ad

Abstract

We present here precise measurements of the layer spacing for two compounds, viz. 4-n-heptyloxyphenyl-4′-(4″-cyanobenzoyloxy)benzoate and 4-n-undecyloxyphenyl-4′-(4″-cyanobenzyloxy)benzoate. Contrary to earlier reports our data do not show any jump in the layer spacing at the expected A_d-A₂ transition temperature, showing thereby that for both compounds A₂ evolves continuously from the A_d phase.     

Synthesis of diaryl sulfides via nickel ferrite‐catalysed C─S bond formation in green media

NiFe₂O₄ magnetic nanoparticles (MNPs) were synthesized, characterized and applied as an air‐stable, inexpensive and magnetically separable nanocatalyst for the synthesis of structurally diverse sulfides. Efficient methodologies were developed for the synthesis of unsymmetric diaryl sulfides via odourless and one‐pot reactions of triphenyltin chloride/S₈ or arylboronic acid/S₈ as thiolating agents with aryl halides or nitroarenes as starting materials in the presence of base (K₂CO₃ or NaOH) and NiFe₂O₄ MNPs as a catalyst in water or poly (ethylene glycol) as solvent at 80–110 °C. Free from ligand and the unpleasant smell of thiols and with the use of magnetically reusable nanocatalyst, green solvents and commercially available and cheap sulfur source and starting materials, these methods are more eco‐friendly and practical than available protocols for the synthesis of sulfides.     

Rapid Suzuki‐Miyaura cross‐coupling reaction catalyzed by zirconium carboxyphosphonate supported mixed valent Pd(0)/Pd(II) catalyst

Mixed valent Pd(0)/Pd(II) nano‐sized aggregates supported onto a chemically robust layered zirconium carboxyphosphonate framework is prepared and its catalytic activity in Suzuki‐Miyaura cross coupling reaction is explored. The exceptionally high catalytic efficacy of the heterogeneous catalyst in Suzuki‐Miyaura cross coupling reaction is signified by remarkably short reaction time 2 minutes and high turnover frequency of 1.3 x 10⁴ hr^?1. The catalyst can be recycled several times without significant loss of catalytic efficacy, while spectroscopic, structural and microscopic investigations suggest the integrity of the catalyst even after fifth catalytic cycle. The unique ability of the zirconium carboxyphosphonate framework to interact strongly with palladium in dual Pd(0)/Pd(II) oxidation states has been attributed to this remarkable augmentation of catalytic efficacy.     

Through-Space Spin Coupling in a Silver(II) Porphyrin Dimer upon Stepwise Oxidations: AgII⋅⋅⋅AgII,AgII⋅⋅⋅AgIII,and AgIII⋅⋅⋅AgIII Metallophilic Interactions

Metallophilic interactions between closed-shell metal ions are becoming a popular tool for a variety of applications related to high-end materials. Heavier d⁸ transition-metal ions are also considered to have a closed shell and can be involved in such interactions. There is no systematic investigation so far to estimate the structure and energy characteristics of metallophilic interactions in Ag^II/Ag^II (d⁹/d⁹), Ag^III/Ag^III (d⁸/d⁸), and mixed-valent Ag^II/Ag^III (d⁹/d⁸) complexes, which have been demonstrated in the present study. Both interporphyrinic and intermetallic interactions were investigated on stepwise oxidation by using a rigid ethene-bridged cis silver(II) porphyrin dimer and the results compared with those for highly flexible ethane-bridged analogues. By controlling the nature of chemical oxidants and their stoichiometry, both 1e and 2e oxidations were done stepwise to generate Ag^II/Ag^III mixed-valent and Ag^III/Ag^III porphyrin dimers, respectively. Unlike all other ethene-bridged metalloporphyrin dimers reported earlier, in which 2e oxidation stabilizes only the trans form, such an oxidation of silver(II) porphyrin dimer stabilizes only the cis form because of the metallophilic interaction. Besides silver(II) ⋅⋅⋅ silver(II) interactions in cis silver(II) porphyrin dimer, stepwise oxidations also enabled us to achieve various hitherto-unknown silver(II) ⋅⋅⋅ silver(III) and silver(III) ⋅⋅⋅ silver(III) interactions, which thereby allow significant modulation of their structure and properties. The strength of Ag ⋅⋅⋅ Ag interaction follows the order Ag^II/Ag^II (d⁹/d⁹)<Ag^II/Ag^III (d⁹/d⁸)<Ag^III/Ag^III (d⁸/d⁸). Single-crystal XRD, X-ray photoelectron spectroscopy (XPS), ¹H NMR and EPR spectroscopy, and variable-temperature magnetic investigations revealed various oxidation states of silver and metallophilic interactions, which are also well supported by computational analysis.